ASCEND® Composite Cladding

• by Nsftutors@gmail.com
• 02/09/2025

ASCEND® Composite Cladding

Nothing does more to impact a home’s exterior design than color. From deep saturated hues in cool neutrals to bold shades and light-changing grays, ASCEND has everything you need to let your vision unfold. Featuring a tall 7″ profile that provides a high-end appearance to help deliver a higher value to your home. A realistic woodgrain appearance drives a stunning and striking look.

• Trespa Pura NFC sidings install easily and look great for many years.
• We discuss the benefits and drawbacks of metal siding in terms of cost, maintenance, curb appeal, durability and more.
• Once the prior steps are done, the new siding will be installed to protect your home from the elements once again.
• During the inspection of your home, the contractor may discover some damage, signs of rot, or asbestos in your home.

Disclaimer: Siding Installation Isn’t a Simple DIY Project

Kaycan demonstrates leadership and excellence in the construction industry. Since 1974, we have been fully committed to quality and innovation, while providing exceptional value to our customers. If you own or are planning to build a smart house, our UltraShield siding is an excellent choice. We are always adding new colors, so make sure to check our site regularly.

New Siding Installation Videos

Corner boards are applied to the sheathing with siding fitting tightly against the narrow edge of the boards, allowing for expansion and an adequate caulking bead. The corner boards and the ends of the siding are nailed to the corner studs which anchors the wood for a maintenance-free joint. Designing roofs with an eaves overhang to protect corners from weathering also helps ensure trouble-free joints. With corner boards, there is the choice of applying them next to the siding or over top of the siding as shown here. Acclimation is key to minimizing or preventing wood movement.

• And buckling, warping and ripples in siding can indicate improper installation and growing water damage behind the cladding.
• Vinyl siding is an economical choice, requiring minimal maintenance and offering a beautiful aesthetic.
• Time constraints can make it hard for you to complete this essential repair.
• Insulated vinyl siding features a layer of foam insulation bonded to the back of the panels.
• Discover cozy, sophisticated home design trends, from neutral interiors to charming curb appeal, and learn how to create the look with help from Rollex.
• We advise against this because that bottom 18 inches will need constant care to keep it looking good.
• You can then remove all of the trim pieces that remain around windows and doors unless you reuse them for your new siding.

The Home Exterior Learning Center

As a homeowner, it is essential to think about the impact that your home improvement project will have on the environment. Our company has been green for a long time — and long before it was fashionable. Accoya® products that are covered by warranty must be installed in accordance with the official Accsys® Accoya guidelines to meet warranty requirements. Cor-a-vent Sturdi-Batten, or similar pre-made furring strips which allow water to drain through the strips. Install the strips horizontally, again with 12″ of space in between them.

Pros of Vinyl Siding for Resale

We recommend you consult a licensed professional before installing the under construction. By choosing our products made from recycled materials, you are participating in this great green initiative. You will be using resources that help rather than harm the environment. For Accoya® products please refer to their installation guide at accoya.com.

How to Install the Top Piece of Vinyl Siding

To determine the amount of siding required, measure the length and width (in inches) of every section where the siding will be installed. Siding installation commonly faces challenges such as achieving proper gapping, managing water infiltration, and maintaining consistent reveals. Proper water management ensures the longevity of the siding and prevents potential damage to the underlying structure. A more professional approach requires a crimping tool that fastens aluminum clips to the top edge of the siding or a siding punch.

• Organizing and keeping a clean workspace is critical for efficiency and safety during the installation process.
• Taking on a home siding project yourself is no small feat—and we respect the drive it takes to do it right.
• Vinyl siding is resistant to heat, cold, and moisture, and it’s certified to withstand winds up to 110 miles per hour.
• Asbestos is highly toxic and will have to be rectified immediately.
• An occasional rinse from the garden hose should keep your siding looking as new as the day it was installed.
• If the faucet falls in the center of the siding, create a lap joint and slide the notched lengths under the faucet from the sides.

Maintenance and Care for Vinyl Siding

Flash all openings, penetrations and other areas where water will collect or travel. With the siding clipped and ready, push it into the utility channel until both the top and bottom of the siding engage with a reassuring click. To finish gable ends, trim the gables with J-channel, cut each length of siding to Siding replacement match the slope of the roof, and nail the siding in place. Finally, caulk all trim where it meets doors, windows and utilities. As for permanent utility equipment, you’ll simply have to work around it.

How To Install Head Trim Around A Window Opening

Finally, deduct the square footage of windows and doors from that number to determine the precise total. Installing during extreme heat or cold requires compensating for the weather. You have to make changes to how it’s installed based on the temperature. Where two pieces of siding meet, there needs to be an overlap of the ends. Overlapping sections of siding by greater amounts than recommended will limit the siding’s movement as it expands, causing a wavy appearance. Arrange the siding according to length and width, put on the necessary work clothes, gloves, and masks, and protect the home and workspace during removal.

Ultimate Guide to Install Vinyl Siding: Step-by-Step Techniques for a Flawless Exterior

Keep in mind, though, that siding is only a worthwhile investment if it is installed correctly. Siding installation or replacement can be a tricky home improvement project; therefore, it is a good idea to hire an experienced contractor to do the work for you. Proper corner post installation will not only enhance the appearance of your home but also protect it from water damage. By following these steps, you can ensure a proper and secure installation of the corner post. Properly cut and fitted siding will ensure a polished and professional appearance.

Certified Vinyl Siding Installers

As in the above illustration, at inside corners, siding is frequently butted against a 2 x 2 trim strip. It can also be butted against adjoining walls with a trim strip used to cover the joint. In carpentry, they say “measure twice, cut once.” The same idiom applies here. Good preparation will save you time and money, so make sure your surface is even and clean.

Fiber Concrete Siding

A successful vinyl siding installation, just like any major project, starts with good planning. You wouldn’t want to end up with mismatched pieces or, worse, not enough siding in the middle of the project. The shake starter strip should be up off the surface of the flashing because we need enough space for the bottom lock underneath the starter strip and up and engaged into the strip. There are several methods that you can use, but all of them begin by terminating the vinyl siding before adding the shake. We recommend you use all standard installation practices for all products you are using. During my time in the industry, I have learned to appreciate the value of a good installation and the technical features of our products.

Protect & Insulate Your Home With Custom Home Siding

• That’s because quality vinyl siding is engineered with PVC, which is incredibly weatherproof.
• This step is critical for preventing mold and mildew buildup behind the siding.
• They’ve been a leading innovator of siding technology for 75 years and offer a V.I.P. limited lifetime warranty.
• Install the siding adjacent to the deck conventionally, and press the cut section into the J-channel.
• If you notice any issues, consider consulting a professional to evaluate the work and recommend necessary repairs.
• During the installation process hopefully you’ve been nailing in the center of the holes as you attached siding to your exterior walls.

Temperature changes cause all building materials to expand and contract. In a building material, as the temperature rises, the material will expand in length; conversely, as the temperature drops, the material will contract in length. All building materials have this property, but vinyl tends to have a higher rate of expansion than materials like wood. With our Winter Worry-Free Installation Program, you’ll have peace of mind knowing that our siding contractors work quickly without losing quality or craftsmanship.

Siding Installation: A Homeowner’s Helpful Step-by-Step Guide

• Once the wood studs come in contact with the exterior cladding, it is easy for energy to pass through them.
• Note that this works for THIS style of vinyl siding, but other types may differ in how they connect.
• Vinyl siding is one of the most durable and long-lasting siding options.
• Head and jamb trim will be installed around all 4 sides of the doorway.
• You might want to install a house wrap for extra moisture protection.

You’ll achieve beautiful curb appeal and enjoy knowing your house is protected from the elements. As you make this valuable investment, if you’ve never replaced your siding before, you may be wondering what to expect. When you work with Premier you’ll get professional, warrantied siding services with affordable siding financing options available. Get a free quote and an expert consultation to bring your new siding ideas to life.

Siding Testimonials

• Sometimes Furring strips are not realistic due to several reasons.
• If you want your vinyl siding installed during the colder months, contact us for a consultation.
• First, they will powerwash all of the walls to make sure they are cleaned off.
• Do this at the other corner of the house and stretch a chalk reel line from the first nail to the second.
• As mentioned, vinyl panels should be able to move slightly after installation to accommodate contraction and expansion.

Begin by installing the first row of siding on both sides of the deck. To provide a common reference point, measure up 8 inches from the top of this row and stretch a string line across the deck. Door and window trim that is about 1 1/4-inches deep will accommodate 1/2-inch insulation board as well as the 1/2-inch siding. Finally, measure the distance from the first row to the deck top and cut the siding to fit over the deck. If your home has a box soffit or a hip roof, nail a second band of J-channel along the soffit edge as it meets the house. If your home does not have a boxed soffit return, but has soffit plywood nailed to the bottoms of the ceiling joists, you may be able to omit the inner channel.

Vinyl siding installation guide

Surprisingly, for dark colors, it does not take much to reach 100° F. Environmental concerns about vinyl siding typically revolve around its production and disposal. Manufacturers are working on more sustainable production methods and recycling initiatives to address these concerns.

We have lots of great Hardie® Plank lap siding installation tips that will help you with your project. Be sure to install the furring strips using screws that go through the sheathing and into the wall studs when possible. We recommend a No. 8 flat-head wood screw, 1-1/2” long, 316 Stainless Steel, with an auger point. The screws should be driven in so that the head is flush with the top of the furring strip.

Siding Installation: Mastering the Art of a Worry-Free Exterior

Vinyl siding is an economical choice, requiring minimal maintenance and offering a beautiful aesthetic. In this comprehensive guide, you’ll learn step-by-step techniques to master the art of install vinyl siding, ensuring a polished and professional look for your home. Vinyl is a thermoplastic material that expands and contracts as the temperature changes.